How do I set up the Auto Formula Timed Mode?
A short article on setting up the Auto Formula Select with the Timed Mode settings.
Step 1
If you do not have a Formula Select Module, you can use this Auto Formula Select to set up either TIMED or BINARY signals. For TIMED the length of the signal sent from this input will denote the program number. PLEASE NOTE – This relies on the MULTIPLIER set in the program settings.
E.G (With a multiplier of 1)
1 second = Program 1
2 seconds = Program 2
(With a multiplier of 2)
2 seconds = Program 1
4 seconds = Program 2
To change the multiplier settings please see the following section – Auto Formula Select Settings.
Once the program is locked in, the program number will appear in the top right of the unit screen.
Keywords
– Timed Mode
– Auto Formula Select
– How do I set up the Auto formula select timed mode?
– How do I set up the Auto Formula Timed Mode?