How do I change the Auto Formula Select settings using the Nexus app?
A short article on what Auto Formula Select settings there are available and how to adjust these using the Nexus app.
Once you are connected to the unit (If you have not already connected please go to the following article – Connecting to your Nexus unit)
You can now edit the Auto Formula Select settings for the unit. You have access to Timed Mode, Timed Mode + and Binary Mode for your setup. For Timed Mode & Timed Mode + the multiplier effects the program selected based on the length of the signal and the Multiplier set. As seen below:
Multiplier 1 = 1 second signal for program 1
Multiplier 1 = 2 second signal for program 2
Multiplier 2 = 2 second signal for program 1
Multiplier 2 = 4 second signal for program 2
Multiplier 3 = 3 second signal for program 1
For Binary Mode you can modify the Setup Time.
. You can also select if it resets to a set program or a blank program.
If you want to send this to the unit, please refer to – How do I write settings to my Nexus system using the app?
Keywords
– Nexus App
– How do I change the Auto Formula Select settings using the Nexus app?
– Auto Formula Select
– Binary mode
– Timed mode
– Auto Formula Select setup